Zendure AB2000 User Manual

2
3. Safety Guidelines
3.1 Usage
1. Store product in a cool and dry place.
2. Do not dispose of the product in heat or re.
3. During the operation of the solar energy system, avoid exposing the
SolarFlow system to direct sunlight to prevent the SolarFlow system from
overheating. Do not place the SolarFlow near any heat source.
4. AB2000 has a protection level of IP65, so the product cannot be immersed
in liquids. If the product accidentally falls into water during use, please place
it in a safe and open area and keep it from people and combustibles until it
is completely dry. The dried product should not be used again and should be
properly disposed of according to the disposal guidelines in this manual.
5. Do not use around strong static electricity or magnetic elds.
6. Do not disassemble the product. Consult ofcial Zendure channels when
service or repair is required. Incorrect disassembly or reassembly may result
in a risk of re or injury to persons.
7. When using the product, please strictly follow the operating environment
temperature range specied in the user manual. If the temperature is too
high, it may result in a re or explosion; if the temperature is too low, the
product performance may be severely reduced, or the product may cease to
work.
8. Ensure the product is not hit, dropped, or heavily vibrated. Securely fasten
the product when transporting to avoid damage. If severely damaged, turn
off the power source immediately and discontinue using the product.
9. Only clean the ports with a dry cloth.
10. Place on a at and level surface to keep the product from falling over. If the
product is overturned and severely damaged, turn it off immediately, place
the battery in an open area, keep it away from people and combustibles,
and dispose of it in accordance with local laws and regulations.
11. Keep out of reach of children and pets.
12. For safety purposes, please use only the original charger and cables
designed for the equipment. We are not liable for damage caused by third-
party equipment and may render your warranty invalid.
EN
2. Specications
Model ZDAB2000
Weight ≈ 21.6kg
Dimensions 350×200×298mm
Capacity 1920Wh/48V
Battery Type LiFePO4
Output Power 1200W Max
Input Power 1200W Max
Max Units per System 4
Max Total Capacity 7680Wh
IP Level IP65
Color Gray
Charging Temperature -20 ~ 55℃
Discharging Temperature -20 ~ 60℃
Warranty 10 Years

Zendure AB2000 Specifications

General

Brand	Zendure
Model	AB2000
Category	Battery Pack
Language	English