Zenith 12 - The Zenith 11 Camera

The Zenith 11
The Zenith 11
incorporates a fauiJt-in
selenium exposure
meter which needs no
batteries. See pages
36/37 for operating
controls. Apart from this
it is identical to the
Zenith 12 XP described
throughout the rest of
this booklet. Zenith 11
owners, therefore,
should carefully study
and follow all the
instructions for the 12
XP apart from the meter
Set Film Speed. In the
cut-outs in the Aperture
indicator Dial [1^] there
are two scales for films
rated in ASA and DIN.
Set the speed of the film
in use by turning the dial
with the small projection.
Any intermediate
positions may be used
and are proportionate.
Point the camera at the
subject, if outdoors with
a bright sky tilt it
downwards somewhat.
Also study the Helpful
Hint for Better Exposure'
on page 14.
Always ensure Exposure
Meter Window [ifcj is
not obscured in any way
when taking a reading.
15