Zenith 12 - Page 7

Lift Rewind Knob
open back.
Insert film cassette into
Rim Chamber {21]
projection of cassette to
bottom.
Push Rewind Knob [16]
down turning slightly to
seal Into cassette.
Draw out enough film to
insert tip of leader into
any of Take-up Spool's
[22] slots ensuring that
the second hole
engages with a tooth on
the spool. Ease film
forward by short
strokes of Transport
Lever [2] until it stops.
The lower Sprocket
Teeth [261 should be
properly engaged.
7