Zenith 12 - Page 8

Fire shutter. Advance
film by short strokes of
transport lever until both
top and bottom
sprockets are engaged.
If necessary tighten film
on Take-up Spool [22]
by turning the flange at
the base of the spool
anti-clockwise with the
finger and in the
cassette by gently
turning the Rewind Knob
[16] in the direction of
the arrow on the lever
until resistance is felt.
This is especially
necessary with twelve
exposure films.
Close the back of the
camera until it clicks
shut. Complete wind-on
if necessary until
Transport Lever [2]
stops.
Rre shutter. Advance
film Transport Lever [2]
using short strokes until
it stops. The Rewind
Knob [16] should revolve
whilst this Is being done.
8