Zenith 12 - Page 9

Fire shutter and
advance film again.
Set Frame Counter [4] to
zero
Set Film Speed Selector
Dial [151 against Indicator
[17] appropriate to the
speed of the film to be
used. There are two scales
for fi 1ms rated in ASA and
DIN. Only click-stopped
numbered or
intermediate positions
may be used.
Intermediate positions
are proportional. If using
1000 ASA film set the
selector to 500 ASA but
use the next faster
shutter speed than
indicated by the meter
or close the aperture
ring by one full stop.
Zenith 11 owners see
Page 15 for how to set
exposure meter.
The camera is now
ready for use.
9