OPERATION PAGE 29
Recording
what you are
watching
on TV.
Instant Recording
Options You Can Use While Recording
Instant recording lets you record until you reach
the end of tape or you press STOP to stop record-
ing.
1. Turn TV and VCR on.
2. Place VCR in VCR mode by pressing TV/VCR on
the remote repeatedly until the symbol
appears in the VCR front panel.
3. Select channel 3 or 4 at the TV. If you have
connected your VCR to the TV’s A/V input jacks,
select the A/V source at the TV for a better pic-
ture.
4. Select the channel to be watched and recorded
at the VCR. If you have a cable box, select the
cable box output channel (usually 3 or 4) at the
VCR. Select cable box channels at the cable box.
5. Insert a VHS cassette tape into the VCR.
6. Press SP/EP to select recording speed, if
desired. Recording speed is always SP, unless
you select EP.
7. Press REC/ITR until recording begins. REC CH_
appears in the VCR front panel. Recording con-
tinues until you reach the end of the tape, or
until you press STOP to stop recording.
VCR
Instant Recording Instant Timer Recording
(until end of tape) (Preset recording times)
PAUSE – STOP or STOP/EJECT –
Momentarily Pauses Stops and exits recording
recording. Press PAUSE mode.
again to resume recording.
STOP or STOP/EJECT –
Stops and exits recording
mode.
To Next Page
Loading...
