What to do if brake does not work well on ZENROLL C1 Scooter due to brake caliper mismatch?
If the brake on your ZENROLL Scooter isn't working well due to a brake caliper mismatch, try adjusting the brake caliper.
General| Battery Capacity | 36V 7.5Ah |
|---|---|
| Charging Time | 4-5 hours |
| Foldable | Yes |
| Max Speed | 25 km/h (15.5 mph) |
| Max Load | 120 kg (265 lbs) |
| Tire Size | 8.5 inches |
| Brake Type | Rear disc brake + electric brake |
Verify electrical systems and brakes are functioning correctly before each ride.
Read manual, avoid water, do not modify, check safety labels, obey laws, keep body parts clear.
Check brakes, tires, guards. Do not exceed the 330 lbs maximum load rating.
Climb grade 30°, max load 330 lbs, max speed 25 mph, 500W motor.
Instructions for charging the battery while it's on or off the bike.
Use only the specified charger. Charge in dry, safe indoor locations away from flammables.
Avoid unattended charging, leaving charger plugged in when full, and charging damaged batteries.
Power assist engages with pedaling. Apply light force for smooth assistance.
Do not submerge, alter, short-circuit, or misuse the battery.
Check battery, connections, throttle, motor, and speed sensor for potential causes.
Always wear a helmet and comply with all local cycling and eBiking regulations.
Inspect for loose parts, check tire pressure, brakes, and secure latches before every ride.
Adhering to the 330 lbs limit is crucial for safety, warranty, and bike integrity.
To Next Page