Zephyr Monsoon Mini II User Manual

20
Monsoon Mini II Use, Care, and Installation Guide
MONSOON MINI II
INSERT
CORE
Maintenance
ŲĬĘĭė
1. Pull the filter latch while pivoting the filter downwards
from the hood.
2. Remove the filter from the hood.
Ų
Hood Model Part Number Qty. to Order
AK95 50210041 2
AK9546AS 50210041 3
To order parts, visit us online at http://store.zephyronline.com.
LumiLight LED
In the unlikely event that your LumiLight LED fails, please contact Zephyr to order replacement parts.
See the list of parts and accessories page for part numbers and contact information.
Push the clip
FIG. G
ĬĘĭė
1. Remove hybrid bae filters.
2. Remove side panels if applicable, and remove
light panels by two screws each.
3. Disconnect LED light quick connector.
4. Push in the two side clips on the ends of the
LED light.
5. Push LED light through the light panel opening.
FIG. F

Zephyr Monsoon Mini II Specifications

General

Brand	Zephyr
Model	Monsoon Mini II
Category	Ventilation Hood
Language	English