Zephyr Typhoon AK2136 User Manual

USE, CARE AND INSTALLATION GUIDE
Read all instructions before installing and operating this appliance
IMPORTANT SAFETY NO TICE
Installation
The installation instruction in this manual is intended for qualified installers, service
technicians or persons with similar qualified background. DO NOT attempt to install this
appliance yourself. Injury could result from installing the unit due to lack of appropriate
electrical and technical background.
All electrical wiring should be properly installed, insulated, and grounded. Overly
accumulated grease on old duct work should be cleaned out or duct work should be
replaced if necessary to avoid the possibility of grease fire. Check all sections and joints
on duct work to insure proper connection and all joints should be properly taped.
Operations
Read all instructions in this manual before operating the appliance. Save these
instructions for future reference.
ALWAYS leave safety grills attached in place at all times. Operating blowers could catch
on to hair, fingers, and loose clothing.
Keep unit and residue containers clean from grease accumulation from time to time.
NEVER dispose foreign substances into the blowers. Do not dispose cigarette ashes or
ignitable substances into the blowers.
Cleaning
Use with extreme caution while performing the Self Cleaning Function and safety grills
are removed. Beware of fingers, hair, loose clothing from getting in the blowers and
NEVER leave children unattended.
NEVER disassemble parts to clean without proper instructions. Disassembly are
recommended to be performed by qualified personnel only. We are not responsible for
injury due to negligence and the warranty of the unit automatically expires due to
improper maintenance. Call our Service Center for removal instructions.
WARNING
MODEL: TYPHOON AK2100, AK2136

Zephyr Typhoon AK2136 Specifications

General

Speeds	3
Number of Fan Speeds	3
Material	Stainless Steel
Color	Stainless Steel
Vent Size	6 inches

Summary

CONTROLS

Controls Overview

Provides an overview of the touch control module and its functions.

Blower and Lights Controls

Details on operating blowers and lights, including speed adjustment and light functions.

Timed Delay Off Function

Explains how to set the automatic shut-off timer for the range hood.

INSTALLATION

Clearances and Ducting Requirements

Specifies minimum clearances and duct size requirements for proper installation.

Duct Opening and Electrical Locations

Illustrates duct opening dimensions and electrical connection points.

Preparing with Template

Guide on using the provided template for marking drill locations.

Installation Steps and Electrical Connection

Step-by-step instructions for mounting and electrical hookup.

Convertible Discharge Options

Guides for converting the hood to vertical or rear discharge methods.

CLEANING & MAINTAINANCE

Self Clean Feature

Explains the automatic self-cleaning function of the range hood.

Cleaning Procedures and Tips

Steps for cleaning safety grills, cups, surfaces, and useful cleaning tips.

Replacing Light Bulbs

Guide on how to replace the halogen light bulbs.

TROUBLE SHOOTING

Common Issues and Solutions Part 1

Addresses common problems like unit not working, blower noise, and weak blowers.

Common Issues and Solutions Part 2

Solutions for fume dissipation, ducting issues, and installation height problems.