Zero 88 FLX Quick Start Guide

Zero 88 Series
Usk House, Lakeside, Llantarnam Park,
Cwmbran, NP44 3HD. UK
Tel: +44 (0)1633 838088 Fax: +44 (0)1633 867880
Email: enquiries@zero88.com Web: www.zero88.com
Lighting Controls – FLX lighting console
Zero 88 FLX Quick Start Guide v1.2 – Stock Code: 9850-000492-00 – Page 19 of 20
Technical information
Mains inlet
FLX is fitted with a Neutrik powerCON TRUE1 (NAC3MPX)
mains inlet on the back panel, and power on/off switch.
100 - 240V AC; MAX 1A 50 - 60Hz, 60W
INTERNALLY FUSED.
A GOOD EARTH CONNECTION IS ESSENTIAL.
The internal fuse is not user replaceable, contact an
authorized service agent if the desk does not power up and
you suspect that the fuse has failed.
Video output
1 x DVI-I connector, but DVI-D output only.
USB ports
Five external USB ports are fitted on the FLX. Two located
on the rear of the console, one on the front panel, and one
on either side. These support the USB 2.0 standard. These
can be used for:
- Wings
- Keyboard & Mouse
- External Touchscreen (DVI-D also required)
- External Storage Devices (such as Memory Sticks)
Ethernet
The FLX Lighting Console is fitted with a Neutrik etherCON
RJ45 Ethernet port and is capable of supporting various
Ethernet protocols.
Kensington Lock
A Kensington-style lock slot is provided on
FLX for securing the console to an operating
location, using a standard laptop lock cable.
Sound to Light
A stereo ¼” jack socket provides basic Sound to Light
functionality. Left and right channels are mixed internally.
Audio Connector
Area
Desc.
Tip
Left
Channel
Ring
Right
Channel
Sleeve
0V Signal
Ground
DMX output
Two female Neutrik 5 pin XLR, isolated, with voltage
protection and data output indicator. Data on channels 1 –
512 only. RDM Ready.
DMX Input Connector
Pin
Desc.
1
Signal Ground (0V)
2
DMX Drive
Complement (1-)
3
DMX Drive True (1+)
4
Not Connected
5
Not Connected
MIDI
2 x 5 pin DIN connectors providing MIDI input and MIDI
thru.
MIDI Connector
Pin
In
Output/Thru
1
Not Used
Not Used
2
Not Used
Signal
Ground
3
Not Used
Not Used
4
Opto Isolated
Input
Output
5
Opto Isolated
Input
Output
Remote input
A 9 pin D-sub connector providing 8 remote switches
(common ground). Short pin 1-8 to pin 9 (common) to
simulate a button push.
Remote Input Connector
Pin
Remote
Switch
1
Switch 1
2
Switch 2
3
Switch 3
4
Switch 4
5
Switch 5
6
Switch 6
7
Switch 7
8
Switch 8
9
Common

Zero 88 FLX Specifications

General

Effects Engine	Yes
Internal Monitor	No
External Monitor	Yes
Ethernet Port	Yes
Faders	24
LCD Screens	Yes
MIDI	Yes