Zero B EMERALD RO - Technical Specifications; Zero B Sapphire RO Specifications; Zero B Emerald RO Specifications; Electrical Supply and Indicator Lights

11
TechnicalSpecifications
PARAMETERS Zero B Sapphire RO Z ero B Emerald RO
Dimensions in mm (basic unit) L x W x H 275 x 230 x 370 275 x 230 x 370
Weight 11 Kg. 11 kg.
* *
Output flow rate 9 ltr./hour 9 ltr. /hour
INLET WATER CONDITIONS
2 2
Inlet pressure 0.5 to 2kg/cm 0.5 to 2kg/cm
Maximum inlet water (TDS) 1300 ppm (subject to hardness of 1300 ppm (subject to hardness of
feed water being less than 500 ppm) feed water being less than 500 ppm)
Rejection of salts (TDS) Upto 95% Upto 95%
Recovery of pure water Upto 35% Upto 35%
ELECTRIC SUPPLY
Operating voltage 230 V AC +1 0% 50 Hz 230 V AC +1 0% 50 Hz
- -
Power consumption 30W maximum 30W maximum
RO booster pump 24 V DC 24 V DC
PURIFICATION STAGES
Sediment filter 10 micron rated 10 micron rated
RO Membrane 60 GPD 80 GPD
Resin carbon cartridge Polyiodinated resin, polishing Polyiodinated resin, polishing
bacteriostatic activated carbon bacteriostatic activated carbon
Power ON Red Red
Purifier ON Blue Blue
Full Tank White White
*Understandardtestconditions
• Product water meets USEPA drinking water standards and IS 10500
• Inlet water must contain NIL total iron and manganese
• Incase the inlet water contains other impurities then call Zero B Customer Care
Help Desk No. 022 2788 1234 before installing the product
• Specifications are subject to change without prior notice