EasyManua.ls Logo

Zero B EMERALD RO - Page 9

Default Icon
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
Startthewaterlineandswitchonthepowerandcheckthefollowingfunctions:
a)PowerON-Redindicatorwillturnon a)PowerON-Redindicatorwillturnon
b)PurificationON-Blueindicatorwillturnon b)PurificationON-Blueindicatorwillturnon
c)TankFull-Whiteindicatorwillturnon c)TankFull-Whiteindicatorwillturnon
d)Purifiedwaterwillstartfillingthetank d)Purifiedwaterwillstartfillingthetank
e) To check for tank-full: The tank gets automatically filled with the purified water. When the
tankisfull,'TankFull'indicatorwillturnONand'PurifierOn'blueindicatorwillturnOFF
f) Itisrecommendedtodraincompletetankwaterforthefirsttime&thencleanthetank&refillagain.It’s
naturaltogetblackishwaterforinitial1.5ltr
SAPPHIRE
EMERALD
LocationoftheUnit:
Ensurethattherejectpointisnottoofarfromthecustomerdrain
Pleasedonotterminatedirectlyintothedrainage(keepithangingoverthedrainage)
Installtheunitawayfromanydirectsourceofheat,sunlightorsplashingwater
ImportantInstructions
YourZeroBROpurifierwillbeinstalledfreeofcostbyour'WaterCareServiceEngineer'.
(Only basic installation material has been provided with the product. Additional material required will be
chargedatactual)

Related product manuals