Controls and Components
3.14
Unit Display - Speed
To change the units that speed is shown in:
1. With the dash in its normal operating mode press and
h
old the SEL button for 5 seconds.
2. Momentarily press the AD
J button to select English
(MPH) or metric (km/h).
3. Momentarily press the SEL b
utton to return to normal
operating mode.
Unit Display - Temperature
To change the units that the temperature display is shown:
1. With the dash in its normal operating mode press and
hold the SEL button for 5 seconds.
2. Momentarily press the SEL button 4 times, the T
emp
icon on the lower dash will start to flash.
3. Press the AD
J button to toggle between F or C on the
display.
4. Momentarily press the SEL button to r
eturn to normal
operating mode.
Zero Owner's Manual (S and DS).book Page 14 Tuesday, January 20, 2015 2:37 PM
To Next Page
Loading...
