General Maintenance
5.12
Brake Pad Replacement
Bedding in new brake pads and/or new brake discs is
recommended to ensure proper brake performance and
maximize brake life. Proper bedding improves brake
pedal/lever feel and reduces or eliminates brake squeal.
Bedding in the brakes is a process of depositing an even
layer of pad material on the surface of the brake disc.
WARNING! With new
brake systems or just new pads, the
first few braking applications will result in very little braking
power. Gently use the brakes a few times at low speeds
(less than 25 mph [40 km/h]) to develop proper braking
frict
ion.
Suspension
Front
• For maintenance, see Maintenance Schedule on
page
5.2.
• To adjust the fork, see Suspension Adjustment on
page
4.17.
Rear
WARNING! T
he shock absorber assembly contains highly
pressurized gas.
• Do not attempt to tamper with or open the cylinder or
shock.
• Do no
t subject the shock to high temperature or open
flame.
WARNING! Doin
g either of the above actions can cause
the cylinder or shock to explode causing personal injury or
death.
For maintenance, see Maintenance Schedule on page 5.2.
To adjust the fork, see Suspension Adjustment on
page 4.17.
Zero Owner's Manual (S and DS).book Page 12 Tuesday, January 20, 2015 2:37 PM
To Next Page
Loading...
