General Maintenance
5.11
Brake Pad Inspection
The brake pads must be inspected when specified in the
maintenance schedule, see page 5.2. Visually inspect the
brakes by looking at the remaining brake pad material
throu
gh the sides of the brake caliper.
Front brake pads
Rear brake pads
Replace the brake pads if either pad’s thickness is 0.053 in
(1.35 mm) or less.
If the brake pads (A) are worn, replace
both brake pads immediately.
Brake Disc Inspection
The thickness of the
b
rake discs should be
checked regularly. The
minimum thickness is
0.15 in (3.85 mm).
Zero Owner's Manual (S and DS).book Page 11 Tuesday, January 20, 2015 2:37 PM
To Next Page
Loading...
