11
5.5 FORMAT YOUR MICRO SD CARD
Before you start using the ZX-40, we recommend that you format the
Micro SD card. You are able to format the Micro SD card using the ZX-
40 the instructions on how to do this is listed below:
1. If you are currently in VIDEO MODE and RECORDING, you
will need to press the SHOOT/RECORD BUTTON to end the
recording first.
2. Once the ZX-40 is fully charged insert your Micro SD Card into the
correct slot (see the “4.0 COMPONENTS” ON PAGE 7).
3. PRESS the ON/OFF BUTTON on the front of the unit to turn ON
the ZX-40.
4. PRESS the
BUTTON on the bottom right of the back screen,
this will open up the SETTINGS MENU. A pop up with two locks
and arrows may appear. Swipe from left to right. You may need to
PRESS the
BUTTON again.
5. PRESS the
tab on the left side of the screen. The current
section tab will be highlighted blue.
6. Scroll down the list by swiping from bottom to top until you reach
FORMAT SD CARD. PRESS on this option.
7. You will be prompted with the options FORMAT and CANCEL.
PRESS on the option that you require. Your SD card will now
format.
NOTE: Formatting the Micro SD card will permanently erase all data stored on the Micro
SD card. Be sure to back up all saved data prior to formatting.
To Next Page
Loading...
Need help?
General
