14
6.5 SETTING THE TIME FORMAT
The ZX-40 has 3 time formats you can choose from, including how the
time is displayed. The options are YYYY/MM/DD, MM/DD/YYYY and
DD-MM-YYYY. The ZX-40 default setting is DD/MM/YYYY. To change
follow the below steps:
1. If you are currently in VIDEO MODE and RECORDING, you
will need to press the SHOOT/RECORD BUTTON to end the
recording first.
2. PRESS the
BUTTON on the bottom right of the back screen,
this will open up the SETTINGS MENU. A pop-up with two locks
and arrows may appear. Swipe from left to right. You may need to
PRESS the
BUTTON again.
3. PRESS the
tab on the left side of the screen. The current
section tab will be highlighted blue.
4. Scroll down the list by swiping from bottom to top until you
reach TIME FORMAT. PRESS on this option. The TIME FORMAT
SETTINGS screen will pop up.
5. PRESS on the option that you prefer. The TIME FORMAT will now
be updated.
To Next Page
Loading...
Need help?
General
