19
6.10 RESET WIFI
If you need to reset ZX-40 WiFi connection, follow the below steps:
1. If you are currently in VIDEO MODE and RECORDING, you
will need to press the SHOOT/RECORD BUTTON to end the
recording first.
2. PRESS the
BUTTON on the bottom right of the back screen,
this will open up the SETTINGS MENU. A pop up with two locks
and arrows may appear. Swipe from left to right. You may need to
PRESS the
BUTTON again.
3. PRESS the
tab on the left side of the screen. The current
section tab will be highlighted blue.
4. Scroll down the list by swiping from bottom to top until you reach
RESET WIFI. PRESS on this option.
5. You will be prompted to confirm or cancel. PRESS on the option
you require. If you PRESS confirm, the WIFI will be reset.
To Next Page
Loading...
Need help?
General
