39
7.7 BURST MODE
To use BURST MODE (takes a preset amount of photos in one
second), follow the steps under ”7.0 PICTURE & VIDEO SETTINGS”
ON PAGE 26. Press BURST to activate this mode.
There are multiple settings in this mode where you can select your
preferred option. To change these settings please follow the below
steps once you are in BURST MODE.
1. If you are currently in VIDEO MODE and RECORDING, you
will need to press the SHOOT/RECORD BUTTON to end the
recording first.
2. PRESS the
BUTTON on the bottom right of the back screen,
this will open up the SETTINGS MENU. A pop up with two locks
and arrows may appear. Swipe from left to right. You may need to
PRESS the
BUTTON again.
3. The settings will open up on the BURST MODE SETTINGS
automatically. Swipe up and down to scroll through the settings
you can adjust.
4. To adjust, PRESS on the setting you wish to change and PRESS on
the option you wish to change. This will update the setting.
Please see the table on the next page to view other available settings.
To Next Page
Loading...
Need help?
General
