Zerova DB Series - Inspection and Commissioning Tools

13
CHAdeMO 200A, GB/T 250A-
Conductor cross section: 3/0AWG
(95mm²) at least, Cable x2 (DC+x1 ,DC-x1)
With Ring terminal for M16 screw ( Inner
diameter > 16mm, Outer diameter < 51mm
; thick type)
Transport
Forklift or crane
Philips Screwdriver
No. 2 and 3
Shifting Wrench
8" (24mm)
Electrical tape
Black/15mm Width
Slotted Screwdriver
-
Hex socket wrench
7 ~24mm
Expansion screw &driver
M12
Wire cutters
Crane / Forklift
Please also check with your local agent to follow all local safety standards
and electrical codes at all times, even if the actual installation process and
procedures are varied to accommodate the existing site condition.
3.4.2 Recommended Tools for Inspection & Commissioning
Type
Description
EV or EV Simulator
Meet CHAdeMO/CCS Standard
Multi-meter
1000V
Current Probe
500A at least
RFID Authorized Card
RFID No Valid Card
Door Key
Needle-Nose
Laptop & CAT6 Cable
Wi-Fi, 3G/4G signal quality checker
Recommended