Zerova DB Series - Network and Charger Configuration; Wi-Fi Network Setup

29
4. Charger and Network Setting
4.1 Wi-Fi Network Setting
•
Laptop with RJ45 interface.
•
Connect RJ45 cable from Laptop to
charger
’
s RJ45 port.
•
Setup parameters in the Webservice.
•
Input RJ45 connector port is for
engineer use for maintance.
Step 1.
Before opening web browser, please
enter network setting to set your IPV4
static IP to 192.168.1.1 in PC
Step 2.
Open web service browser, type the IP
address of charger
“
192.168.1.10
”
into
the URL bar to access the web page of
charger.
•
Account: admin
•
Password: 1231231238
RJ45
login https://192.168.1.10
Account admin
Password 1231231238
192.168.1.10
Use the following IP address:
IP address:
Subnet mask:
Default gateway:
. . .
255 . 255 . 255 . 0
192 . 168 . 1 . 1