Zeta Alarm Systems SIMPLICITY PLUS

Need help?

Do you have a question about the Zeta Alarm Systems SIMPLICITY PLUS and is the answer not in the manual?

Summary

Reporting New Devices Found

Reduced Loop Simplicity Panels

Changing a Zone Boundary

Changing the Alarm Response - Sounders

Changing Detector Alarm Response

Configures how detectors trigger sounders for alarm notification, choosing between common or zonal.

Changing MCP Alarm Response

Configures how Manual Call Points trigger sounders for alarm notification, choosing between common or zonal.

Zonal Sounder to Common Sounder Delay

Sets a delay for zonal sounders to activate for the entire system if an alarm persists.

Associated Sounder Base Settings

Configures sounder bases to operate in common alarm mode or zonal alarm mode.

Changing the Alarm Response - I;O Units

Types of I;O UNIT Operation

Lists and describes the various operational modes available for I/O units.

Setting Default I;O UNIT Operation

Establishes the standard operational mode for all I/O units on the system.

Setting Individual I;O UNIT Operation

Allows for the modification of the operation mode for specific I/O units.

Setting the LCD Language

Alarm Verification

How Alarm Verification Works

Explains the process and logic behind the alarm verification feature.

Setting the Alarm Verification Delay

Configures the specific time delay for the alarm verification process.

Applying Alarm Verification Delay to a detector

Assigns the configured alarm verification delay to individual detectors.

Restoring the Panels Default Settings

Viewing Panel Information

Menu Structure

Details the panel's menu hierarchy and navigation pathways.