PLANNED TECHNICAL MAINTENANCE
INSPECTION AND TRACTOR MAINTENANCE 3
After engine hours
Inspection and maintenance operation
10
70
100
200
600
1200
1800
2400
3000
3600
4200
4800
5400
6000
2 Greasing of front wheel hub (add grease max. to 1/3 of space) X X X
Greasing of steering ball joints X X X X X X X X X X
Inspection for front wheel bearing play X X X X X X X X X X X
Inspection for front wheel toe in X X X X X X X X X X X
Inspection for torque of steering connection rod bolts, nuts, steerig
arms and wheels
X Every 10 hours
Inspection for tire inflation pressure X Every 10 hours
Inspection for steering function,steering oil level in steering tank X Every 10 hours
FRONT DRIVING AXLE
Exchange of oil in front axle housing and final drive housings * X X X X X
Inspection for oil level in front axle housing and final drive housings X Every 200 hours
Greasing of drive shaft joits X X X
Greasing of king pins X Every 200 hours
Greasing of pivot pin sliding bearing X Every 200 hours
HYDRAULICS
Greasing of top sensing torsion bar X X X X X X X X X X
Greasing of top sensing lever X Every 200 hours
Greasing of top sensing link X Every 200 hours
Greasing of lift assist cylinder pins X Every 200 hours
Greasing of telescopic control link X Every 200 hours
Greasing of right lifting link X X X X X X X X X X
PDF byl vytvo’en zkuˇebns verzs FinePrint pdfFactory http://www.fineprint.cz
To Next Page
Loading...
