HYDRAULIC SYSTEM
A 100 A 101
HYDRAULIC INNER CIRCUIT
Hydraulic inner circuit is controlled by
the inner circuit control lever (1), control
position mode selection lever (2) and re-
sponse rate control lever (3). Adjustable
stop (4) maintains the inner circuit
control lever in the selected position.
RESPONSE RATE CONTROL LEVER
(3)
The oil flow into inner circuit is the big-
gest one if the lever is in position to-
wards driver´s seat. Hydraulic response
rate is reduced by restriction of the oil
flow at the draft or mixed control, for
example when ploughing in various soil
conditions.
INNER CIRCUIT CONTROL LEVER (1)
Inner circuit control lever controls:
- Lifting and lowering implements.
- Height adjustment of three point hitch
with implements at selected position
control.
- Pulling force adjustment (resistance of
implement at draft or mixed control)
- Setting of so called floating position at
work with implement equipped with
supporting wheel.
PDF byl vytvo’en zkuˇebns verzs FinePrint pdfFactory http://www.fineprint.cz
To Next Page
Loading...
