Zetor 3321 SUPER - Exchange of Hook for Draw Bar; Pick up Hitch; Swinging Drawbar for Trailers

60
TRANSPORTATION
A 86 A 86a A 86b
∗ PICK UP HITCH
Pick up hitch is intended for coupling of
two wheel trailers with yoke corres-
ponding to ISO 5692 (the internal yoke
eye diameter is 50 mm and eye height is
30 mm). Pick up hitch hook is hydrau-
lically raised and lowered by means of
length adjustable telescopic links. Ma-
ximal vertical static load is 17 kN. Pick
up hitch is capable for pulling of maximal
traction force.
EXCHANGE OF HOOK FOR DRAW
BAR
This hitch device can be equipped with
swinging draw bar that is in the opposite
side of hitch hook.
Swinging draw bar can have three
working positions. Change of hitch hook
for swinging draw bar is carried out by
lowering of hitch hook carrier into posi-
tion suitable for removing of pins (a).
Afterwards the hitch hook is removed
from the carrier and inserted into such
position that the swinging draw bar
clevis is in front of carrier.
∗SWINGING DRAWBAR FOR
TRAILERS
Maximal vertical static load is 12 kN.
Swinging draw bar is capable for pulling
of maximal traction force.
PDF byl vytvo’en zkuˇebns verzs FinePrint pdfFactory http://www.fineprint.cz