Serious failures of travel clutches and reversing levers syste
Less serious failures of travel clutches and reversing system
Blocking the automatic dead start function
Three-gear torque multiplier
A failure of serious failure category is signalized by a red
control gearbox failure, there is an uninterrupted acoustic
signal and there is a sign STOP displayed on a display
together with a number of failure.
If this situation occurs, put the tractor aside
and contact the service forthwith.
FH12N060
A failure of a category less serious is signalized on
a display by displaying a number of failure for a time
period of approximately 5 seconds (1). Then the display of
failure minimizes to the main field (2). All the function of
the tractor remain active, it can happen, that some of the
functions will not be complete.
If this situation occurs, finish your work and
contact service.
FHD14N045
With some failures of travel clutches system, the function
of automatic dead start is blocked. This situation is
signalized by an inscription displayed on a display. In this
case reversing lever under the steering wheel serves only
for the selection of direction of drive, the button for clutch
control on gear shifting lever does not work. For dead start
of tractor and gear shifting, it is possible to use only clutch
pedal.
If this situation occurs, finish your work and
contact service.
FH12N073
Three-gear multiplier is a standard equipment of all types
of tractors. Shifting individual gears of three-gear multiplier
is controlled by two buttons on the head of main gear
shifting lever.
It is done without travel clutch pedal depressed (under
load).
H - Increasing travel speed
L - Decreasing travel speed
FH12N058
To Next Page
Loading...
Need help?
General