Zetor 106 41 forterra turbo User Manual

Safety guidelines for operating the tractor, including driving, slopes, and loads.

Procedures and warnings for recovering or pushing the tractor safely.

Guidelines to prevent fire hazards during operation and maintenance.

Daily checks and maintenance tasks to ensure safe tractor operation.

Identification and function of various switches and levers on the tractor.

Location and function of the battery isolator switch.

Diagram illustrating the electronic engine control system components.

Overview of how the electronic engine governor operates.

Procedure for setting and memorizing temporary engine speeds.

How to reset or delete temporary engine speed settings.

Procedure for setting and memorizing permanent engine speeds.

Recalling permanent memory speeds when the H/O lamp is off.

Recalling permanent memory speeds when the H/O lamp is on.

How to reset the governor and return to manual pedal control.

Setting entry/exit speeds for tillage and saving to memory.

Setting operating speed and saving to temporary memory.

Using temporarily memorized speed for tillage operations.

Resetting temporary memory and recalling entry/exit speeds.

Resetting permanent memory and temporary memorizing operating speed.

Using temporarily memorized speed for tillage operations.

Procedure for setting the PTO shaft speed.

Setting a constant travel speed using the governor.

Engaging PTO and setting speed for 540 or 1000 RPM.

Temporarily memorizing the PTO speed.

Maneuvering the tractor and resetting temporary memory.

Pre-operation checks and procedures before starting the engine.

Critical warnings against improper engine starting methods.

Procedure for starting the engine on models with glow plugs.

How glow plug system failures are indicated and what they mean.

Procedure for starting engines with electronic thermostat assistance.

Information on engines equipped with glow gratings for easier starting.

Detailed procedure for starting engines with glow gratings.

Using the cooling liquid heater for easier engine starting in cold.

Checks and procedures immediately after the engine starts.

Proper procedures for warming up the engine after starting.

Explanation of the tractor's gearbox and gear shifting mechanism.

Step-by-step guide to starting the tractor in motion.

Safety precautions and procedures for driving uphill.

Critical warnings and procedures for driving downhill safely.

Description of the service foot brakes and their operation.

Control and synchronization of trailer pneumatic brakes.

How the air pressure drop warning signal functions.

Synchronization and operation of trailer hydraulic brakes.

Procedures for stopping and parking the tractor safely.

Proper procedure for stopping the engine on specific models.

Procedure for stopping the engine on Z 11741 models.

Final steps and safety measures before leaving the tractor.

Interpretation of warning signals for hydrostatic steering failure.

Basic principles for breaking in a new tractor during the initial 100 hours.

Specific running-in procedures for the first 10 operating hours.

Maintenance and checks required after 10 operating hours.

Maintenance and checks required after 50 operating hours.

Maintenance for Z 8641-Z 11441 models after 70 hours.

Maintenance and checks required after 70 operating hours.

Final checks and maintenance after 100 operating hours.

General guidelines for operating the PTO shaft safely.

How to control the front and rear PTO shafts.

Procedure for changing PTO shaft speeds.

Detailed steps for changing the rear PTO shaft speed.

Safe operation of machines with high inertia masses.

Safe procedures for connecting and disconnecting quick couplers.

Explanation of the functions of the hydraulic control levers.

How to connect implements to the tractor's outer hydraulic circuit.

Identification and function of the hydraulic control elements.

Selecting the hydraulic control mode (P, M, D).

Safety precautions when using electrical switches for the hitch.

Diagram illustrating the EHR B electro-hydraulic system operation.

Description of the functions of various controls on the panel.

Procedure to eliminate the system's blocking mechanism.

Procedures for operating the hydraulic system during field work.

Safety precautions when using electrical buttons for the hitch.

How EHR-B system failures are signaled.

Detailed explanation of EHR-B failure signal codes.

Explanation of the electro-hydraulic EHR-B light failure indicators.

Description of the rear three-point hitch and its specifications.

Safety guidelines for manipulating the three-point hitch.

Step-by-step guide for attaching machines to the hitch.

Description of the front three-point hitch and its capabilities.

Adjusting hitch rate and hydraulic locking.

Safety advice for driving with front-suspended implements.

Procedure for measuring and adjusting front wheel toe-in.

Procedure for changing the track width of the rear wheels.

How to adjust the rear wheel track using rims and disks.

Step-by-step guide for filling tractor tires with liquid ballast.

Steps for safely draining liquid ballast from tractor tires.

Safety procedure for applying blocks to front wheels before lifting.

How to check the engine oil level correctly.

Procedure for draining the engine oil.

Steps for replacing the engine oil filter.

Procedure for bleeding air from the fuel system.

Procedure for filling oil and bleeding the hydrostatic steering circuit.

Step-by-step guide to bleeding the hydrostatic steering hydraulic circuit.

Procedure for draining and refilling the engine cooling liquid.

Procedure for checking and replenishing brake fluid.

How to check the pneumatic systems for leaks.

Procedure for inflating tires to recommended pressures.

Procedure for tightening cylinder head bolts in the correct order.

Instructions for bleeding the tractor's brake system.

Procedure for bleeding the rear brake system.

Procedure for bleeding the clutch hydraulic circuit.

Procedure for calibrating the digital dashboard's travel speed display.

Guidelines for cleaning, fixing, and maintaining the storage battery.

Procedures for charging and maintaining the storage battery.

Maintenance schedule for the tractor's hydraulic system.

Detailed lubricating chart for Z 8641 - Z 11741 tractors.