213
SCHEDULED TECHNICAL MAINTENANCE
TRACTOR INSPECTION AND MAINTENANCE
After accomplishing.......operating hours (Oh)
Inspection and maintenance operations
10
70
100
300
600
1 200
1 800
2 400
3 000
3 600
4 200
4 800
5 400
6 000
ENGINE
Exchange of engine oil X X Every 300 Oh
Replacement of the full-flow engine oil filter X X Every 300 Oh
Tightening of the heads of cylinders X
Inspection and setting-up of the valve clearance X X X X X X
Inspection of the engine lubricating pressure after its starting X Every 10 Op
Inspection of the amount of oil and tightness of the engine lubrication system joints X Every 10 Oh
Cleaning of the turbo-blower compressor hosing and of the filling piping X X
Inspection of the turbo-blower and turbo-blower bearing plays X X
Inspection of the water pump bearing play X X
ENGINE ACCESSORIES
Inspection of the cooling liquid amount and of the cooling system joint tightness X Every 10 Oh
Inspection of the fuel tank and fuel system tightness X Every 10 Oh
1 Cleaning of the radiator fins with the pressure air X X Every 300 Oh
2 Cleaning of the air conditioning condenser fins Every 50 Oh
Maintenance of the dry air cleaner (as per the obstruction indicator) X Min. every 100 Oh
3 Exchange of the cooling liquid XXXXX
Inspection and setting-up of the injection pump X X
Inspection of the turbo-blower lubrication system joint tightness X X X X
Inspection of the exhaust piping tightness X XXXXXXXXXXX
Inspection of the injector opening pressure and of the injection nozzle operation X X X X X X X
Exchange of the fuel filter cartridge XXXXXXXXXX
Inspection and setting-up of the engine V-belts X X Every 300 Oh
Inspection and cleaning of the fuel rough filter X X Every 300 Oh
To Next Page
Loading...
