Hydraulic syste
Tractor´s speed in km/h with engine nominal revolutions
Performance on rear PTO shaft
Type of tractor Major 60 Major 80
Maximal lifting force at the end of lower draw bars of
rear three-point linkage when maximum useful pressure
(kN)
26
Lifting force at the end of lower draw bars of rear three-
point linkage in the whole range of heave with
maximum useful pressure (kN)
24
Hydraulic system pump supply (l/min) 50
Working pressure (MPA) 18
Gear
reduction
Gear Forward speed Reversing speed
L
1 L 1.43 1.20
2 L 2.12 1.78
3 L 3.11 2.61
4 L 4.37 3.67
M
1 M 3.64 3.05
2 M 5.39 4.52
3 M 7.89 6.62
4 M 11.08 9.30
H
1 H 9.65 8.11
2 H 14.29 12.00
3 H 20.91 17.56
4 H 29.39 24.68
Performance on PTO shaft (kW ± 2%)
- with nominal engine revolutions and engaged 1000
rpm of PTO shaft
Major 60 Major 80
Nominal engine revolutions (2200 rpm) 38,4 48,6
MAIN TECHNICAL PARAMETERS
To Next Page
Loading...
