I
If engine does not start 40
Immediately after start 41
Important notification 53
In first 10 hours of operation 55
Independent PTO shaft revolutions 125
Information display - basic view 33
Information display - fault notifications 33
Information display - indication of activation of PTO shafts 34
Information display - indication of activation of PTO shafts 62
Information display - warning indication of PTO shafts 34
Information display - warning indication of PTO shafts 62
Information display - warning indication of the hand brake 33
Information display - warning indication of the hand brake 43
Internal hydraulic circuit control elements 70
L
Leaving the tractor 53
Lights adjustment in cab roof check 95
Lights adjustment in tractor´s grill 95
Lights adjustment in tractor´s grill check 95
Limiting draw bars 78
Liquid for the cooling system of the tractors 101
List of lamps 96
Location of serial numbers 9
Lower draw bar with CBM hooks 79
Lower draw bar with slipping out end pieces 79
M
Main technical parameters 121
Main tractor's parameters (mm) 121
Maintenance and treatment of tires 116
Maintenance instructions 103
Maintenance of the oil cooler of the front PTO 116
Making front wheels stable 88
Manipulation with starter 41
Manual brake and PTO shaft disengagement lever 36
Manual fuel control lever 34
Maximum permitted vertical static suspensions load for
trailers and semitrailers 59
Maximum transmitted output 68
Means of internal hydraulic circuit regulation 69
Minimum fuel amount in the fuel tank 38
Mixed regulation of three-point linkage heave 72
Modular suspension system for trailers and semitrailers 58
Motor oils 99
Multistage adjustable suspension 57
N
Notification signalization of air pressure drop 50
O
Oil for the front driving axle 100
Oil replacement in gear system 113
Oil to gear systems of tractors 100
One-hose and two-hose brakes 50
One-hose brakes 51
One-section switchboard external hydraulic circuit
controlling levers function 74
Opening doors from the inside 25
Opening doors from the outside 25
Other recommended service fillings tested on Zetor tractors 100
P
P.T.O. shaft clutch control lever adjustment 118
Panel of switches on cab´s roof 28
Parking brake adjustment 119
Pedals 35
Performance on rear PTO shaft 124
Permitted maximum load of front axle (kg) 123
Permitted maximum load of rear axle (kg) 123
Permitted maximum weight of set 'tractor + mounted
machine' (kg) 123
Placement of fuses in fuse box 94
Plastic lubricant for the tractor 101
Position regulation of rear three-point linkage heave 71
Pouring oil to engine 104
Power regulation of three-point linkage heave 71
Preventive daily maintenance 15
Preventive daily maintenance 21
Preventive daily maintenance 21
Principles for operating tractors equipped with front end
loader 19
Proper clothing 11
Protection of cab against aerosols 16
PTO shaft covers 61
PTO shaft drive engagement lever 37
PTO shaft drive engagement lever 63
PTO shaft revolutions 540 and 1000 rpm shifting lever 37
PTO shaft revolutions 540 and 1000 rpm shifting lever 63
Q
Quick-couplers engagement and disengagement 74
R
Raw fuel filter clearing 105
Rear PTO shaft - dependent revolutions 65
Rear three-point linkage 77
Rear wheel track change 86
Rear window 26
Reassembly of the air cleaner elements 108
Recovery of the mainair cleaner element 107
Replacement of filter element of hydrostatic control 111
Replacement of the filter of the hydraulics suction 110
Replacement of the transmission oil cleaner element with
hydraulic pump suction filter 110
Replacing fillings and filters 98
Replacing full-continuous motor oil filter 104
Replacing the hoses of hydrostatic steering 112
Replacing the safety element of the air cleaner 107
Reversing lever 36
Risk of the tractor overturning 13
Road and reduced speeds shifting lever 36
Running in the tractor 55
S
Safety cab 25
Safety instructions for lubrication of the tractor 102
Safety labels 20
Safety principles when working with a three-point linkage 77
Securing lower draw bars with CBM hooks 80
Selecting driving direction - reversing lever 45
Selection of holes in bracket 79
Selection of road or reduced speeds 45
Service inspections 97
Setting wheel stops with front drive axle 84
Short functional test 23
Side window 26
Specification of oil for the front driving axle 99
Speed of three-point linkage lowering control 70
Starting the engine 40
Starting the engine 12
Steps taken after every 100 hours of operation 97
Steps taken after every 500 hours of operation 97
Steps taken beyond 500 Mth interval 97
Stopping the engine 52
Stopping the tractor - manual brake 52
Stretching the V-belt in the air-conditioner compressor 117
Stretching the V-belt in the compressor 117
Swing drawbar 58
Swing drawbar bracket module 58
Switch box key in the position (0) 30
Switch box key in the position (I) 30
Switch box key in the position (II) 30
Switch of warning lights 29
Switches and controls on the dashboard 28
T
Technical data of engines 122
The button for activation of the front PTO shaft 63
The button for temporary deactivation of brakes of the
trailer or semi-trailer 49
The clutch release lever of the manual deactivation of the
rear PTO shaft 62
The level of external noise of tractor 17
The level of internal sound of tractor 17
The level of vibrations on driver´s seat 17
Three-point linkage and rear semi-axes bearings 102
Tilting steering wheel 27