Zetor MAJOR - Performance on Rear PTO Shaft; Independent PTO Shaft Revolutions

Performance on rear PTO shaft
Dependent PTO shaft revolutions with nominal engine revolutions
Independent PTO shaft revolutions
Clearance-circle and turning circle diameter
Performance on PTO shaft (kW ± 2%)
- with nominal engine revolutions and engaged 1000
rpm of PTO shaft
Major 60 Major 80
Nominal engine revolutions (2200 rpm) 38,4 48,6
Performance on PTO shaft (kW ± 2%)
- with nominal engine revolutions and engaged 1000
rpm of PTO shaft
Nominal engine revolutions (2200 rpm) 47
Maximum engine revolutions (2460 rpm) 51
Gear
reduction
Gear 540 1000
L
1 L 66 120
2 L 96 176
3 L 139 255
4 L 202 369
M
1 M 166 304
2 M 242 443
3 M 350 641
4 M 507 928
H
1 H 446 816
2 H 650 1190
3 H 941 1721
4 H 1362 2492
labelling Shaft revolutions/engine
revolutions
Shaft revolutions/engine
revolutions
540 613 / 2200 540 / 1938
1 000 986 / 2200 1000 / 2231
Wheel base
front 1502 mm
Parameter
of tires
front 11,2 - 24
On the left On the right
rear 1505 mm rear 16,9 - 30
Turning circle
diameter(mm)
without engaged front drive axle 10610 10580
with engaged front drive axle 11360 11270
Clearance-
circle diameter
(mm)
without engaged front drive axle 11130 11100
with engaged front drive axle 11880 11790
MAIN TECHNICAL PARAMETERS
102