Section 7. Programming Log And Quick Reference
7-4
35# ___# Select Paging Format
0 = Disable paging
1 = DTMF Format
2 = 100 Call Two Tone Format
3 = 1000 Call Two tone Format
4 = DTMF and 100 Call Two Tone Formats
5 = DTMF and 1000 Call Two Tone Formats
0
36# ___# (100 Call) “A” Tone - Tone Groups - 0 - 13
or (1000 Call) Code Plan, Code Plans - 0 - 24
0
37# ___# “B” Tone - Tone Groups 0 - 13 0
38# ___# Set Two-Tone Timing (Range 0 to 7) 0
39# ___# Group Call Operation
0 = Group Calls Enabled
1 = Diagonal Tone Replaces “A” Tone
2 = Diagonal Tone Replaces “B” Tone
0
40# ___# Number of DTMF Digits User Must Enter
(1 to 8)
3
41# ______# DTMF Strapped Digits
42# ___# DTMF Strapped Digits Position
1 = Strapped Digits Precede Digits Entered
2 = Strapped Digits Follow Digits Entered
1
49# ___# Mobile-to-Mobile Paging
(0 = Disabled, 1 = Enabled)
0
50# _# ____# Program Autodial Numbers (0 to 49)
53# ___# Dial Tone Detect Time
(1 to 9 seconds, 0 = Disabled)
0
57# ___# Non-DTMF Mobile Access
(0 = Disabled, 1 = Enabled)
0
58# ___# Dual Function Connect Button
(0 = Disabled, 1 = Enabled)
0
59# ___# Multiple Second Dial Tone
(0 = Disabled, 1 = Enabled)
0
To Next Page
Loading...