24
VI CORROSION PROTECTION
Suggested actions:
For information on this topic, review the published guidelines as contained in ABYC guidebook,
Section E-2.
Upon final delivery of the vessel a review of the electrical bonding system should be
conducted. An expert in the field of electrical bonding should be called upon to review the
completed vessel. This review should determine if there is an appropriate amount or sizing of
sacrificial anodes installed in order to protect the mechanical components (engine and SD-10)
from damage from galvanic corrosion.
Please keep in mind, changes made to the vessels AC and DC systems may impact the
protection of the installed anode system.
Damage to the SD-10 as a result of failure to maintain a good balanced galvanic protection
system is not the responsibility of ZF Marine.
To Next Page
Loading...
Need help?
General
