EasyManuals Logo

ZF SD-10 User Manual

ZF SD-10
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7
IV Operation
1. General
All SD 10 transmissions have been submitted to a test run before shipment. During normal
operation, the transmission should only be shifted with the engine at idle speed. In
emergency cases it is also admissible to shift at higher speeds. Visual checks for leakage
should be made from time to time.
WARNING. Work on the transmission must only be performed with the engine and
propeller at standstill.
CAUTION. Before the first startup, the transmission must be filled with transmission fluid.
Start the engine only when the transmission is in neutral position.
CAUTION. Using the transmission with an insufficient oil level will damage the gears. An
excessive oil level may cause leakage at the shaft seals and the transmission breather,
and raise the operating temperature considerably.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ZF SD-10 and is the answer not in the manual?

ZF SD-10 Specifications

General IconGeneral
BrandZF
ModelSD-10
CategoryMicrophone system
LanguageEnglish

Related product manuals