12zhiyun-tech.com
Balance Adjustment on Roll Axis
Balance Adjustment
NOTICE
The Tilt Axis is designed with memory scale marks, and
it is normal to hear clicking sound or feel minor pauses
when adjusting the camera, as it moves 2mm by each
scale.
Firstly, loosen Thumb Screw
❷
(rotate for 3 times).
Adjust the Tilt Axis until the camera can stay still with
the lens facing up (i.e. the camera stays still and vertical
to the ground), complete this step by tightening up
Thumb Screw
❷
.
Loosen Thumb Screw
❶
. Adjust the Roll Axis until
the camera can stay still while keeping the Horizontal
Arm
1
level. Complete this step by tightening up
Thumb Screw
❶
.
To Next Page
Loading...
