11 zhiyun-tech.com
Level Adjustment on Tilt Axis
Mounting Plate
Loosen the screw at the bottom of the Mounting
Plate, so that it can slide forward or backward.
NOTICE
If there should be any conflict between the Rotary
Knob
❹
and the Camera Mounting Screw
❺
, pull the Rotary Knob
❹
upward and restore
it to the startup position (similar to the operation
method of a wrench), and rotate it again.
Push the camera forward or backward to find its
level balance. Once the camera can stay still and
almost level with its lens facing front, complete this
step by tightening up the Rotary Knob
❹
.
Balance Adjustment
To Next Page
Loading...
