EC Declaration of Incorporation - Translation -
(english)
ZA87-GB 1836 Index 008
as defined by the EC Machinery Directive 2006/42/EC, Annex II B
The design of the incomplete machine:
•
Axial fan FA.., FB.., FC.., FE.., FF.., FG.., FS.., FT.., FH.., FL.., FN.., FV.., DN.., VR.., VN.., ZC.., ZF.., ZG.., ZN..
•
Centrifugal fan RA.., RD.., RE.., RF.., RG.., RH.., RK.., RM.., RR.., RZ.., GR.., ER.., WR..
•
Cross-flow fan QK.., QR.., QT.., QD.., QG..
Motor type:
•
Induction internal or external rotor motor (also with integrated frequency inverter)
•
Electronically commutated internal or external rotor motor (also with integrated EC controller)
complies with the requirements in Appendix I, Articles 1.1.2, 1.1.5, 1.4.1, 1.5.1 in EG Machinery Directive
2006/42/EG.
The manufacturer is the
ZIEHL-ABEGG SE
Heinz-Ziehl-Strasse
D-74653 Künzelsau
The following harmonised standards have been used:
EN 60204-1:2006+A1:2009+AC:2010 Safety of machinery; electrical equipment of machines; Part 1:
General requirements
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk
assessment and risk reduction
EN ISO 13857:2008 Safety of machinery; safety distances to prevent danger zones
being reached by the upper limbs
Note: The maintenance of the EN ISO 13857:2008 relates only to the
installed accidental contact protection, provided that it is part of the
scope of delivery.
The specific technical documentation in accordance with Appendix VII B has been written and is available in its
entirety.
The person authorised for compiling the specific technical documentation is: Dr. W. Angelis, address see above.
The specific documentation will be transmitted to the official authorities on justified request. The transmission can
be electronic, on data carriers or on paper. All industrial property rights remain with the above-mentioned
manufacturer.
It is prohibited to commission this incomplete machine until it has been secured that the machine into
which it was incorporated complies with the stipulations of the EC Machinery Directive.
Künzelsau, 03.09.2018
(location, date of issue)
ZIEHL-ABEGG SE
Dr. W. Angelis
Technical Director Air Movement Division
(name, function)
ZIEHL-ABEGG SE
Dr. D. Kappel
Deputy Head of Electrical Systems
(name, function)
(Signature) (
Signature)
To Previous Page
Loading...
Need help?
General
