EasyManua.ls Logo

Zimmer Biomet Tricera - User Manual

Zimmer Biomet Tricera
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DCO-1318
Effective Date: 01-SEP-2021
LBL 6028 Rev. G
Page 1 of 23
ENGLISH
Tricera System
Instructions Manual
ABOUT THIS MANUAL
This manual provides information on how to set up, operate, and
maintain the Tricera System. It is essential that you read and
understand all of the information in this manual before using or
maintaining the system.
CONTENTS
About this manual ................................................................................................ 1
Contents .............................................................................................................. 1
1. Symbols Used on the Tricera System Labeling ........................................ 1
2. Device Description ..................................................................................... 2
3. Indications for Use ..................................................................................... 2
4. Contraindications ....................................................................................... 2
5. Warnings .................................................................................................... 2
6. Precautions ................................................................................................ 3
7. Environmental Protection .......................................................................... 5
8. How Supplied............................................................................................. 5
9. System Components ................................................................................. 6
10. System Setup ............................................................................................ 9
11. System Operation ....................................................................................11
12. Disassembly ............................................................................................12
13. Cleaning ...................................................................................................12
14. Storage ....................................................................................................12
15. Tricera Controller settings, Maintenance, Troubleshooting and Repair .12
16. Limited Warranty .....................................................................................14
17. Customer Service/Technical Support ......................................................14
Appendix A Controller Product Specifications ........................................15
Appendix B Optional Data Output ..........................................................15
Appendix C Abbreviations ......................................................................15
Appendix D Tones ..................................................................................15
Appendix E Troubleshooting ..................................................................16
Appendix F Essential Performance, Power Curve .................................18
Appendix G EMC Tables ........................................................................19
Appendix H User Profiles ........................................................................21
1. SYMBOLS USED ON THE TRICERA SYSTEM
LABELING
Catalog Number
Consult Instructions for
Use
Lot Number
Serial Number
Do not reuse
Do not re-sterilize
(disposable specific)
Date of
Manufacture
Manufacturer
Store in a cool dry
place
Sterilized Using
Irradiation
Use by date
Federal (US) law
restricts this device to
sale by or on the order
of a physician.
Caution, consult
accompanying
documents.
Do not use in the
presence of
flammable
anesthetics
Type BF Applied Part
Radiofrequency (RF)
Energy (non-ionizing
radiation)
Non Sterile
Risk of Electrical
Shock
Equipotentiality
Fuses
Coagulation
Ablation
OK button
Message Screen Info
Settings Button
Profiles Button
Recalibrate Button
Unlock Cassette
Buttone
Play Button
Stop Button
Footswitch
Set Pressure Arrow
Do not use if
package is
damaged
Waste Electrical and
Electronic
Equipment. Must
follow local law for
equipment disposal.
MRI unsafe
European Authorized
Representative

Other manuals for Zimmer Biomet Tricera

Questions and Answers

  • C
    christine30Aug 4, 2025
    How to replace a fuse in Zimmer Biomet Tricera Medical Equipment controller?
    • K
      karen86Aug 4, 2025
      To replace a blown fuse in the Zimmer Biomet Medical Equipment controller: * Turn off the power and disconnect the power cord from the electrical outlet. * Open the Power Entry Module’s Fuse Drawer on the back of the Controller. * Remove and replace both fuses with 5x20mm 6.3A/250VAC Type “T” (slow blow) fuses. * Close the fuse drawer. Note: Only use the specified type of fuses. There are no other user-serviceable parts; return the cleaned unit to the manufacturer for other replacements.
  • R
    robertsautumnAug 9, 2025
    What to do if Zimmer Biomet Medical Equipment handpiece will not run?
    • A
      Adriana WilsonAug 9, 2025
      If the Zimmer Biomet Medical Equipment handpiece isn't running, it could be due to a couple of reasons. First, check that the handpiece is properly connected to the controller; if not, remove and reconnect the handpiece cable to the controller according to the RELIGN Tricera System instructions. Alternatively, the cord might be malfunctioning, in which case you should send the handpiece to RELIGN for repair.
  • B
    Brian HawkinsAug 14, 2025
    What to do if the shaver blade/RF probe is not correctly detected by the Zimmer Biomet Tricera Medical Equipment handpiece?
    • A
      angelathorntonAug 14, 2025
      If the shaver blade/RF probe isn't being correctly detected by the Zimmer Biomet Medical Equipment handpiece, there are a couple of things you can try. First, remove the shaver blade/RF probe and reinsert it according to the RELIGN Tricera System instructions. If that doesn't work, the handpiece may be malfunctioning. Remove and reconnect the shaver blade/RF probe to another Tricera Handpiece to confirm the possible cause. Send the malfunctioning Tricera Handpiece to RELIGN for repair.
  • S
    Samantha HallAug 18, 2025
    Why is the Activate function not operating smoothly on my Zimmer Biomet Tricera Medical Equipment?
    • J
      jacksonbrandiAug 19, 2025
      If the Activate function is not operating smoothly on your Zimmer Biomet Medical Equipment, it could be due to a malfunctioning cable or controller. To troubleshoot, remove and reconnect the handpiece to a different Controller. If the problem persists, send the Tricera Handpiece to RELIGN for repair.
  • T
    tannerdeanAug 25, 2025
    How to fix a shaver blade that does not turn in Zimmer Biomet Tricera Medical Equipment?
    • D
      donna63Aug 25, 2025
      If the shaver blade in your Zimmer Biomet Medical Equipment isn't turning, it might not be inserted properly. Remove the blade and reinsert it according to the RELIGN Tricera System instructions for directions on use of the Tricera Handpiece as part of the RELIGN Tricera System.
  • N
    Nicole WrightAug 28, 2025
    How to remove staining and discoloration from Zimmer Biomet Tricera Medical Equipment?
    • M
      Mackenzie DavisAug 29, 2025
      Staining and discoloration on Zimmer Biomet Medical Equipment can occur due to inadequate cleaning, such as remaining protein residues, or if cleaning solutions are contaminated or being reused. To resolve this, clean in accordance with section 10.1, and always use freshly prepared solutions. Repeat cleaning in accordance with section 10.1.

Summary

Tricera System Labeling Symbols

Tricera System Device Description

Key System Components

Lists the main components of the Tricera System.

Indications for Use

Details the intended medical procedures for the system.

Contraindications

Lists conditions where the system should not be used.

Safety Warnings and General Precautions

General System Warnings

Critical safety information for overall system use.

Fluid Management & Handpiece Warnings

Safety instructions for fluid management and handpiece use.

General System Precautions

Guidelines for safe and effective equipment use.

System Precautions and Environmental Safety

Controller Specific Precautions

Essential precautions for the Tricera Controller.

Environmental Protection Guidelines

Guidelines for waste disposal and environmental impact.

System Supply and Component Handling

How the System is Supplied

Details the items included in the shipping box.

Disposable Device Handling

Proper handling and disposal of disposable components.

Tricera System Components Overview

Controller Front Panel Features

Identifies and explains controls on the controller's front.

Controller Rear and Accessories

Details controller rear connections and accessories.

Tricera Footswitch Functionality

Explains the various pedals and buttons on the footswitch.

Fluid Management and Handpiece Details

Fluid Management Accessories Explained

Describes the Veriflow and Exoflow fluid management parts.

Tricera Autoclavable Handpiece Features

Details the features of the Tricera autoclavable handpiece.

Shaver Blades and Handpiece Controls

Handpiece LCD and Button Layout

Explains the display and buttons on the handpiece.

Tricera Device Structure

Identifies the components of a Tricera device.

Tricera System Setup Procedures

Controller Setup Instructions

Steps for placing and connecting the Tricera Controller.

Attaching the Fluid Management Cassette

Instructions for inserting and locking the FMA cassette.

System Setup and Calibration Steps

Veriflow FMA Specific Setup

Detailed setup steps for the Veriflow FMA set.

Handpiece and Suction Tubing Connection

Connecting the handpiece and suction tubing.

Joint Selection and System Calibration

Procedure for selecting the joint and calibrating the system.

Tricera System Operation

General System Operation

General guide for operating the Tricera System.

Setting and Adjusting Cavity Pressure

How to set the desired cavity pressure.

Activating Inflow and Tricera Device

Procedures for activating inflow and the Tricera device.

System Disassembly, Cleaning, and Storage

Disassembly Procedure

Instructions for disassembling the Tricera System.

Cleaning Precautions and Methods

Guidelines for cleaning the system components.

Storage Recommendations

Instructions for storing the system components.

Tricera Controller Settings and Customization

Volume, Language, and Basic Settings

How to adjust system volume and language preferences.

Handpiece Control Customization

Configuring handpiece button latch and joystick functions.

Advanced Operation Settings

Settings for suction, lavage, and sheath change detection.

Controller Management, Warranty, and Support

Controller Language and Fuse Management

Changing controller language and replacing fuses.

Limited Warranty Information

Details the warranty coverage and claim procedures.

Customer Service and Technical Support

How to get help with the Tricera System.

Appendices: Specifications, Data, and Definitions

Appendix A: Controller Product Specifications

Technical specifications for the Tricera Controller.

Appendix B: Optional Data Output

Information on integrating with the ZEOS video system.

Appendices C & D: Abbreviations and Tones

Lists abbreviations and system tones.

Troubleshooting Common System Issues

Controller Power and Self-Test Failures

Solutions for controller power and self-test failures.

Operational Malfunctions and Inflow Problems

Troubleshooting controller malfunctions and inflow issues.

Footswitch & Handpiece Connection Errors

Resolving errors related to footswitch and handpiece connections.

Advanced Troubleshooting and Error Resolution

Purge and Activation Failure Solutions

Solutions for purge completion and activation issues.

Suction and Handpiece Power Issues

Troubleshooting insufficient suction or handpiece power loss.

Essential Performance and Power Curves

Essential Performance Criteria

Defines the essential performance standards for the system.

Power Curve Graphs

Graphs showing output power relative to load resistance.

Electromagnetic Compatibility (EMC) Emissions

Electromagnetic Emissions Statement

Information on the system's electromagnetic emissions.

EMC Guidance and Declarations

Guidance for using the system in different electromagnetic environments.

Electromagnetic Immunity and RF Separation

Electromagnetic Immunity Statement

Details the system's immunity to electromagnetic disturbances.

Recommended Separation Distances

Distances for RF equipment to avoid interference.

User Profile Configuration and RF Guidelines

User Profile Setup and Naming

How to configure and select user profiles.

RF Separation Distance Calculations

Explains calculations for RF separation distances.

Detailed User Profile Settings

Profile Selection and Name Screen

Interface for selecting and naming user profiles.

Profile Settings: Suction, Speed, RF, Pressure

Configuration options for suction, speed, RF, and pressure.

Advanced User Profile Settings

Profile Settings - Lavage

Settings related to the lavage mode.

Profile Settings - Other Options

Settings for button latch, joystick, and audio tones.

Zimmer Biomet Tricera Specifications

General IconGeneral
BrandZimmer Biomet
ModelTricera
CategoryMedical Equipment
LanguageEnglish

Related product manuals