How to fix Zimmer Medical Equipment if it does not turn on?
If your Zimmer Medical Equipment doesn't turn on, first ensure that the power connector is properly connected. Also, check if the power switch of the equipment is turned on.
What to do if Zimmer emFieldPro Medical Equipment shows an over temperature error?
If your Zimmer Medical Equipment displays an over temperature message, and the applicator is used in a tilted position, put the applicator away from the patient for a while without turning off the equipment until the message disappears and the equipment returns to a normal state. Maintain a horizontal position as much as possible and maintain the room temperature at less than 25°C as much as possible.
General| Category | Medical Equipment |
|---|---|
| Manufacturer | Zimmer MedizinSysteme |
| Intensity Range | Adjustable |
| Voltage | 100-240 V |
| Frequency | 50/60 Hz |
| Type | Electromagnetic Therapy Device |
| Application | Pain relief |
| Frequency Range | 1 – 100 Hz |
| Treatment Modes | Multiple pre-set programs |
| Applicators | Various sizes for different body parts |
| Programs | Pre-set |
| Display | Touchscreen display |
| Power Supply | Mains powered |
| Safety Standards | IEC 60601-1 |
To Next Page
