How to fix Zimmer Medical Equipment if it does not turn on?
If your Zimmer Medical Equipment doesn't turn on, first ensure that the power connector is properly connected. Also, check if the power switch of the equipment is turned on.
What to do if Zimmer emFieldPro Medical Equipment shows an over temperature error?
If your Zimmer Medical Equipment displays an over temperature message, and the applicator is used in a tilted position, put the applicator away from the patient for a while without turning off the equipment until the message disappears and the equipment returns to a normal state. Maintain a horizontal position as much as possible and maintain the room temperature at less than 25°C as much as possible.
Why is the magnetic field not generated from Zimmer emFieldPro Medical Equipment?
If the magnetic field is not being generated by your Zimmer Medical Equipment, first confirm if the LCD displays an ERROR message. If there is no error message, check if the output strength is set by turning the Turning Knob after pressing the Start button.
What to do if the temperature icon on the screen blinks and the Zimmer emFieldPro Medical Equipment is not operated?
If the temperature icon on the screen blinks and the equipment is not operated, stop the operation by cutting off the power to the equipment.
Details components of the device's front panel and controls.
Identifies connections and features on the device's rear.
Explains various screens and display elements of the device.
Shows and lists the accessories included with the device.
Describes the device's medical purpose and target users.
Instructions for connecting the power supply to the device.
Details the procedure for powering the device on.
Overview of the start-up and standard device screens.
Explains how to initiate the device's configuration menu.
Explains how to adjust settings like brightness, volume, and language.
Overview of device components, power rating, and general safety.
Guides on how to position and adjust the transducer for treatment.
Explains Time remaining, Intensity, Start/Stop, and other display indicators.
Details the Programs, Favourites, and Expert modes.
Details how to change parameters within the Favourites mode.
Introduces the Expert mode for custom program creation.
Details the available parameters for Expert mode programs.
Explains how to change program names and parameter values.
Describes adding, operating, and removing sub-modes in Expert mode.
Instructions for cleaning and disinfecting the device's housing and applicator.
Guidelines for regular visual checks of the device's condition.
Procedures for ensuring safe use through internal cleaning and checks.
Provides steps to resolve common equipment issues.
Emphasizes the need for scheduled inspections by authorized personnel.
Explains the 'Over Temperature' warning and necessary actions.
Informs about the cooling module's lifespan and maintenance needs.
Describes the 'Transducer Error' message and required service.
Provides instructions on how to properly dispose of the device.
Details the device's compliance with standards for emitted interference.
Outlines the device's resistance to external electromagnetic interference.
Specifies safe distances from HF telecommunications equipment.
General| Category | Medical Equipment |
|---|---|
| Manufacturer | Zimmer MedizinSysteme |
| Intensity Range | Adjustable |
| Voltage | 100-240 V |
| Frequency | 50/60 Hz |
| Type | Electromagnetic Therapy Device |
| Application | Pain relief |
| Frequency Range | 1 – 100 Hz |
| Treatment Modes | Multiple pre-set programs |
| Applicators | Various sizes for different body parts |
| Programs | Pre-set |
| Display | Touchscreen display |
| Power Supply | Mains powered |
| Safety Standards | IEC 60601-1 |
To Next Page
