The emFieldPro is manufactured according to the safety regulations of IEC 60601-1.
As manufacturer, Zimmer MedizinSysteme GmbH can only be considered
responsible for the safety and reliability if:
- the device is operated using a proper power outlet that is properly grounded and
the electrical installation complies with DIN VDE 0100 part 710,
- the equipment is operated in accordance with the instructions for use,
- extensions, readjustments or modifications are carried out only by persons
authorized by Zimmer MedizinSysteme GmbH
- the user is satisfied regarding the functional safety, the proper condition and
mechanical integrity prior to using of the device,
- the device is operated only by properly trained personnel,
- the device is not operated in hazardous areas and / or a combustive atmosphere,
- the device is immediately disconnected from the mains in the event of the
penetration of liquids. The device does not contain any parts that can be serviced by
the operator.
The device does not contain any parts that can be repaired by the operator.
Modification of this device is not permitted.
Service and replacement of components may only be performed by certified service
technicians from Zimmer MedizinSystems GmbH.
To Next Page
Loading...
