Zinwell Powerline Ethernet Bridge User Manual

2
ORDERING INFORMATION
This PLC Device user manual describes Powerline to Ethernet Bridge and
Powerline to Ethernet Switch devices. PLC stands for Powerline
Communication.
The Powerline to Ethernet Bridge device converts the Ethernet packets from its
Ethernet port to the Powerline Communication packets (PLC packets), which then
run on home electrical power lines, and converts the PLC packets back to Ethernet
packets.
The Powerline Ethernet Switch device is a four-port Ethernet Switch device
bridged together with the Powerline communication interface. It converts the
Ethernet packets from any of its Ethernet port to PLC packets, and from PLC
packets back to Ethernet packets. Also, Ethernet packets between any two of the
four Ethernet ports are communicable, just like a normal Ethernet switch.
See the following table for a summary.
Categories Description
Powerline Ethernet Bridge
It sends any packets from its Ethernet port
to the Ethernet port of the other Powerline
Ethernet Bridge. It converts from Ethernet
packets to be transmitted via home electric
wires to the other PLC device.
Powerline Ethernet Switch
The Powerline Ethernet Switch device
sends any packet from any of its Ethernet
port to the other three Ethernet ports of
itself, or to the Ethernet port of a remote
Powerline Ethernet Bridge device.

Zinwell Powerline Ethernet Bridge Specifications

General

Brand	Zinwell
Model	Powerline Ethernet Bridge
Category	Switch
Language	English