Zip Hydroboil HS001 User Manual

Zip Hydroboil - Installation & Operating Instructions - 85264 - May 2013 v1.01 Page 1 of 12
Installation and Operating Instructions
Zip Hydroboil
Instant boiling water
HS001 Zip Hydroboil 1.5 Litre White 01552
HS003 Zip Hydroboil 3.0 Litre White 03552
HS005 Zip Hydroboil 5.0 Litre White 05552
HS105 Zip Hydroboil 5.0 Litre Stainless Steel 05551
HS007 Zip Hydroboil 7.5 Litre White 07552
HS107 Zip Hydroboil 7.5 Litre Stainless Steel 07551
®

Zip Hydroboil HS001 Specifications

General

Model	HS001
Type	Instantaneous Water Boiler
Capacity	3 Litres
Dimensions	420mm (H) x 250mm (W) x 180mm (D)
Weight	4.5kg (empty)
Material	Stainless Steel (Internal Tank)
Power	2000 W
Voltage	230 V
Installation	Wall Mounted
Safety Features	boil-dry protection

Summary

Installation Checklist

Product Specifications

Warnings and Safety First

Important Safety Information

Crucial safety advice, warnings, cautions, and notes for product use.

Continued Warnings and Safety

Safety, Lifting, and Conditions

Guidance on safe handling, lifting, operating temperature range, and environmental conditions.

Installation Requirements

Space and Clearance

Required clearances around the unit for service access and tap positioning.

Installation Requirements (Continued)

Electrical and Water Supply Specs

Details on electrical connection, water pressure, and pipework requirements.

Installation Procedures

Preparation and Positioning

Pre-installation checks, template use, and heater positioning guidelines.

Fastening and Initial Connections

Steps for securing the unit to the wall and preparing for plumbing/wiring.

Installation Procedures (Continued)

Plumbing, Venting, and Electrical Connections

Detailed instructions for connecting water inlet, vent, and electrical supplies.

Tap Fitting and Assembly

Unit Commissioning

Technical Diagrams and Verification

Earthing Continuity Verification

Electrical Diagram and Troubleshooting

Wiring Diagram

Problem Solving Guide

Maintenance and Cleaning