Need help?Do you have a question about the Zip hydroboil plus and is the answer not in the manual?
General| Model | Hydroboil Plus |
|---|---|
| Type | Instant Boiling Water Heater |
| Voltage | 220-240V |
| Temperature Control | Adjustable thermostat |
| Finish | Stainless steel |
| Installation Type | Wall Mounted |
| Material | Stainless steel |
| Safety Features | Boil-dry protection |
| Capacity | 3L, 5L, 7.5L, 10L |
Specifies clearances for service access, tap height, and mandatory vertical/horizontal orientation.
Details power cable, pressure, drainage, and vent access requirements for installation.
Covers initial checks, template use, and heater placement relative to tap and clearances.
Steps for securing the heater and making the initial cold water inlet connection.
Guide for installing the filter cartridge and plumbing the vent outlet correctly.
Covers electrical connection, case reassembly, and final checks before operation.
Provides schematic for electrical connections and dimensions for wall mounting template.
Lists common symptoms, possible causes, and solutions for operational issues.
Procedure for testing the heater's earthing continuity after service.
Instructions on how to operate the taps for both boiling and ambient temperature water.
Explanation of the 'Power On' indicator light status.
Guidance on how to safely clean the external casing of the heater.
Step-by-step guide on how to remove and install a new filter cartridge.
Instructions for removing the unit case and tap cartridge using a special key.
Guidance on adjusting the flow rate for the chilled/cold outlet.
Details on connecting the unit for ambient or filtered water supply.
Instructions for connecting to a chilled water unit and insulation tips.
Catalog of available spare parts with corresponding part numbers and descriptions.
Explains connection and disconnection procedures for John Guest fittings.
Outlines the 12-month warranty, exclusions, and limitations of liability.
Information on how to register the installation to help establish the date of installation.
To Next Page