To Next PageTo Next Page
Need help?Do you have a question about the Zip Hydroboil HS007 and is the answer not in the manual?
General| Model | HS007 |
|---|---|
| Capacity | 7 liters |
| Frequency | 50 Hz |
| Material | Stainless steel |
| Type | Wall mounted |
| Power | 3000W |
| Voltage | 230V |
| Installation | Wall mounted |
| Safety Features | Boil-dry protection |
Pre-installation checks including reading instructions, water quality assessment, and power checks.
Checks before starting operation, ensuring correct installation and plumbing.
Steps for initial startup, including flushing, filling, and powering on.
General safety guidelines for product use, installation, and handling, including supervision.
Guidance on correctly positioning the heater on the wall for optimal tap drainage and service access.
Instructions for drilling holes, removing covers, and securely mounting the heater chassis to the wall.
Detailed steps for connecting water supply, venting, and electrical wiring to the heater unit.
Steps for assembling the unit, fitting the tap, and final commissioning before operation.
How to use the two-way tap for dispensing boiling water, including cup filling and pot filling modes.
