To Next PageTo Next Page
Need help?Do you have a question about the Zip Hydroboil HS003 and is the answer not in the manual?
Checks and preparations required before starting the installation process.
Final checks on plumbing and electrical connections before powering up.
Procedures for turning on the water supply and power.
Essential safety guidelines for operating and handling the appliance.
Guidelines for safely lifting and moving the appliance unit.
Recommended ambient temperature range and frost protection.
Proper methods for cleaning the appliance's exterior.
Minimum clearances needed around the appliance for installation and service.
Specifications for the required electrical connection and protection.
Requirements for the cold water supply, including pressure and valves.
Requirements for connecting the appliance's vent and drainage.
Guidance on placing the heater correctly on the wall.
Instructions for securely mounting the heater to the wall.
Details on connecting water, vent, and electrical supplies.
Procedure for assembling the casing and fitting the tap.
Final steps to prepare the unit for operation after installation.
How to use the two-way tap for dispensing boiling water.
Diagram showing physical dimensions for mounting.
Procedure for verifying earth continuity after installation or service.
Schematic representation of the appliance's electrical connections.
Instructions on how to register the appliance for warranty purposes.
General