To Next PageTo Next Page
Need help?Do you have a question about the Zip Hydroboil HS005 and is the answer not in the manual?
General| Model | HS005 |
|---|---|
| Type | Instantaneous Water Boiler |
| Capacity | 5 Litres |
| Material | Stainless Steel |
| Voltage | 230V |
| Installation Type | Wall-mounted |
| Safety Features | Boil-dry protection |
General safety advice for users, including children and unsupervised use. Avoid touching hot tap.
Advice on safe lifting of the unit, considering weight limits and seeking assistance if needed.
Recommended ambient temperatures, frost protection measures, and cleaning methods for the unit.
Details on required electrical supply, fused spur, isolation switches, and RCD protection.
Specifies potable cold water supply, minimum/maximum pressure, and the need for a pressure reducing valve.
Requirements for outlet drainage to a sink or drip tray and safe access for the vent pipe.
Guidance on heater placement, tap height above draining board, and clearance for service access.
Instructions for drilling holes, mounting the chassis, and securing the unit to the wall with suitable fixings.
Details the procedures for plumbing, venting, and electrical connections to the unit.
Instructions for assembling the casing and fitting the tap assembly correctly, including PTFE tape use.
Steps to follow after installation, including filling with water, checking leaks, and initial heating periods.
How to operate the two-way tap for dispensing boiling water, including filling cups and larger vessels.
