Zip HYDROTAP G4 series - Security and Communication Settings

22
USER MANUAL
805846UK - ZIP HYDROTAP G4 V1.00 NOV 2017
TECHNICAL SUPPORT TEL: 0345 6 005 005 EMAIL: SERVICE@ZIPINDUSTRIES .CO.UK
WWW.ZIPWATER.CO.UK
SECTION 8 LCD SCREEN
8.6 Communication
• From the Home screen press
[Menu].
• Press [Comm’s]
• Enter your 4 digit password to
access the WiFi set up.
• Follow the set up instructions in the
ZipAssist installation manual.
WiFi Setup
Zip BC Sparkling
15:11 Tue 26, July 2016
Cloud server
not registered
Status:
Hotspot disabled
Mode:
Disabled
To disable the WiFi setup navigate to
the WiFi screen (as above).
• Press [WiFi setup].
• In the next screen Press [Disable]
• Press [<=] button for the previous
menu.
8.5 Security
The Zip HydroTap G4 allows the appliance coordinator to set up a password
to protect against users changing the preferred system settings.
To set a password
• Press the [MENU] button for main
menu.
• Press the [Security] button.
• Press [Enable Password].
• Enter a 4 digit password.
• Press [Enter].
To change a password
• Press the [MENU] button for main
menu.
• Press the [Security] button.
• Press [Change Password].
• Enter your old 4 digit password.
• Then enter your new 4 digit
password & press [Enter]. (Once
the password has been set you
will need to enter the password
to access the settings screen. If
you have forgotten the password,
please disconnect the power and
restart your HydroTap G4).