Zip HydroTap G4 - Page 15

801314 - Zip HydroTap BC, BCHA, AIO, Installation Instructions - Aug 2015 - V2.01 Page 15 of 40
Installation Instructions
A A
Left Hand Control Right Hand Control
B
C
C
B
50mm
Height adjustment (Fixed position options)
Angular adjustment (Fixed position options)
1.7
O-RING
LOWER
RUBBER
WASHER
WASHER
NUT
1.8
1.9
Mounting
(See table on Page 11 )
Cut a 35mm hole in the bench / sink top.
BENCH TOP
Ø35mm
NOTE: Position A is
not recommended with
Boiling water units