Zip HydroTap G4 - LCD Screen operation - Section E; E Security; To set a password; LCD Screen operation - Section F

801912 - G4 BCS, BCSHA Commercial User Guide - July 2015 - v2.00 Page 17 of 28
E Security
The Zip HydroTap G4 allows the appliance coordinator to set up a password
to protect against users changing the preferred system settings.
To set a password
1. Press [MENU] button for main
menu.
2. Press [Security] button.
3. Press [Enable Password}
4. Enter a 4 digit password
3. LCD Screen operation - Section E
To change a password
1. Press [MENU] button for main
menu.
2. Press [Security] button.
3. Press [Change Password}
4. Enter your old 4 digit password
5. Then enter your new 4 digit
password. You will need to
enter your password to access
the settings screen. If you have
forgotten the password, please
disconnect the power and restart
your HydroTap unit.
F Communication (when available)
The Zip HydroTap G4 allows the user to use Wifi to monitor and control the
product remotely.
Not yet available
LCD Screen operation - Section F